Notable Productions

Lexicon PCM 70 Digital Effects Processor. Used.

Lexicon PCM 70 Digital Effects Processor Used
The Lexicon PCM70 is an effects rack with chorus, flange, reverb, multiband delays and resonate chords. With a mono feed in and stereo effect out, it’s heritage is from the Lexicon 224X and was one of the first effects processors to offer MIDI implementation.

Call Dan at 617-680-5840 or email at dan@notable.com for more details.

updated: 8 months ago

Genelec 8260A Studio & Mastering monitors for sale. W Auto Cal - GLM w/ Measurement Microphone. Price includes pair, mic & software.

Tri-amped configuration with 10" bass driver, a 5" midrange driver and a 3/4" Al-dome tweeter. Digital Input: AES/EBU (single/dual wire). Input sampling rate: 32-192kHz. Speaker weight: 60.5 lbs. Control network: Proprietary Genelec Loudspeaker Manager network (GLM). System calibration: AutoCal, GLM manual, Stand-alone.

Call Dan at 617-680-5840 or email at dan@notable.com for more details.

updated: 8 months ago

Apogee AD16X 16 Channel Audio Interface

Apogee AD16X 16 Channel Audio Interface

2X AD16X

updated: 8 months ago

We sell Ram and Hard drives for Apple MacIntosh Computers.

We sell Ram and Hard drives for Apple MacIntosh Computers
We sell high quality Ram , Hard drives and CD and DVDR burners for almost all Mac Models and can install it for a nominal charge. Please call. We also have a working relationship with SuperMacMan and can setup installs of audio software and even teach users how to use the programs. Lessons and setup of Pro Tools, Logic, Digital Performer, and Reason are all available.

updated: 8 months ago

Zip Drives for AKAI MPC Drum machines and Roland Drum Machines

After fixing one of my clients Roland Sp808 drum machines by replacing the ailing Zip Drive and seeing how outrageous the prices were on the Web ($150-200!)... I decided to keep a few extras and fix some friends units. If you need one I have them for $75 in good condition and will install them for another $25.

Call Dan at 617-680-5840 or email at dan@notable.com for more details.

updated: 3 years ago

Avid Sync IO for sale used. Silver and Blue.  $200

Avid Sync IO for sale used Silver and Blue nbsp200
This is great until you upgrade too Pro Tools 11. It was mostly telling my Apogee Big Ben Clock what sample rate each session was recorded at…. Now it doesn't. I bet that code was made for the Sync HD and is in its firmware. For now it is going to have to be OK that I stand up and manual tell the clock what Sample rate to use.

updated: 8 months ago

Tannoy DMT12 Passive Studio Monitors.

(One of Tony Maserati's Favorite Mix Speakers could be sold with Bryston 4B amp for perfect match)
Coaxial studio monitors. Very accurate and focused phase honest speakers. They reveal detail, often used for mastering and mixing. Robust and hard to overdrive.
If you want to buy them with the Bryston 4b and cables, let me know and we can work out a packaged price.

Call Dan at 617-680-5840 or email at dan@notable.com for more details.

updated: 8 months ago

Millennia Hv3  Microphone Preamp for sale use

2 channel Microphone Pre-amp

Ultimate pristine clean fast straightwire gain for your lovely microphones. It is revered amoung classical, jazz and pop recordists. Even when Im using a neve or api to get punchy distortion on drums I love using this for the overheads or clean ribbon mic gain for something I want to stand out as clear as a bell. Vocals, acoustic guitars, Even snare sometimes gets the love. An old rca 44 or 77 through this beast is full and  powerful. I have 8 more channels or I would not sell it. It has been back to Millennia for a tune up and some older power supply components to be replaced last year but otherwise its been solid as a rock. Its now really a vintage piece as its birth was in 1994 but its clean as whistle sonically and cosmetically.

Call Dan at 617-680-5840 or email at dan@notable.com for more details.
Millennia Hv3 nbspMicrophone Preamp for sale use

updated: 3 years ago

Digidesign SMPTE SLAVE DRIVER SSD for Sale USED

Digidesign SMPTE SLAVE DRIVER SSD for Sale USED

The SMPTE Slave Driver (MH034, SSD) is a synchonization peripheral used to resolve Digidesign systems to LTC/SMPTE.
Supported Interfaces: 888 I/O, 882 I/O, 882 Studio, 442 I/O, ProMaster 20.
Sample Rates: 44056 (44.1k Pull Down), 44100, 44144 (44.1k Pull Up), 47952 (48k Pull Down), 48000, 48048 (48k Pull Up).
LTC Input: Balanced XLR female connector, -20 to 22 dBu level, 200k differential input impedance.
LTC Output: Balanced XLR male connector, 2.5V p-p balanced ( 3.8 dBu RMS),

updated: 8 months ago

Microboard MX-2 DVD & CD Publisher ( duplicator and printer ) $1700

Two high-speed DVD/CD recorders. HP Vivera inks and outstanding 4800-dpi resolution. 100-disc capacity. One set of ink cartridges can produce 850 to 1,500 discs.

Call Dan at 617-680-5840 or email at dan@notable.com for more details.
Microboard MX-2 DVD amp CD Publisher  duplicator and printer  1700

updated: 3 years ago

AKAI S1000 Sampler w 32 megs.  Used.  $350

AKAI S1000 Sampler w 32 megs nbspUsed nbsp350
Sampler w/ 32 megs of ram + Dig I/O IB 104.

Advanced edit capabilities for looping, truncating, sample merging, time comp/exp, tuning and even analog-like parameters to control its filters and envelopes. Individual outputs for each of the 16 voices, stereo mix out, stereo input, MIDI, and trigger inputs round out this machine as a professional vintage-status sampler that still proves to be very useful even today!
notable 923

It features 16-voices, up to 32MG of RAM, and 24-bit internal processing wherein samples can be processed through a set of analog-like (although digital) modifiers, including a digital filter (18dB/octave), an LFO, and two ADSR envelope generators (one for amplitude and one for the filter). The S1000 also offered up to 8 different loop points.

The S1000 came standard with a set of XLR and a set of 1/4" inputs on the front panel for sampling with an knob and switch for gain adjustment. On the back panel is a stereo out and 8 assignable outputs, along with effects send (mono) and return (stereo), a footswitch input, and the usual MIDI connectors (IN, OUT, THRU).

Available options included expanded memory (up to 32MB with Akai's own memory boards), Atari Hard Disk Interface Board, Digital Audio Interface Board, and SCSI Interface Board.

Call Dan at 617-680-5840 or email at dan@notable.com for more details.

updated: 3 years ago

Roland D110 Synthesizer

Roland's D110 was a very underrated little module. It's principal purpose was to provide users with a range of stock sounds that would just be generally useful in a wide range of different musical styles.

Offering 32-voice polyphony and 8-part multi-timbrality, you could buy cards for the D110 to expand the on-board sounds. Typically, these were 'orchestral', 'brass', 'woodwind', etc., making it a versatile source of 'bread and butter' sounds for any number of musical applications. However, the cost of memory at the time was high and so the cards (and on-board memory) only had limited storage. As a result, the samples were short and compromised. That said, in the right hands, the D110 could sound surprisingly good, especially at the time (1988). I remember hearing a demo of one on the Roland stand at a trade show when it was released and it was very impressive (but then, most Roland demos are!).

Call Dan at 617-680-5840 or email at dan@notable.com for more details.
Roland D110 Synthesizer

updated: 3 years ago